Flex Strip IP65 Xtend Mono

Flex Strip IP65 Xtend Mono

All the advantages of the Flex Strips extended up to 20 m long. The PROLED Flex Strip IP65 Xtend Mono is perfect when you have large rooms and long walls to illuminate with continuous light quality.

  • Excellent light quality and colour rendering, and – thanks to 48-volt technology – uniform dimmingover the entire length
  • Only one power feed needed for a length of 20 m. Significantly reduced installation effort.
  • Installation with 3M adhesive tape on the strip’s backside (self adhesive). For better holding wesuggest additional mounting clips or special glue.
  • IP65 when correctly sealed
  • Dimmable with suitable PWM dimmers

Accessories including:
4x end caps (2x input and 2x end)
sealing compound 5 ml

Technical Data

IP classification


Power source

48 VDC

Electrical connection

2x cable with 2-PIN to open wires

Maximum quantity per power input

20 m

Average lifetime*

50.000 h at L80/B10

Operating temperature range

-10° C till +45° C

Width x height

14 x 5 mm

min. Bending radius

20 mm


all 13 LEDs (10 cm)

dimmable and controllable via DMX 512, DALI, KNX, 1-10 V, CASAMBI, RF by MULTI power supplies/controller

Photometric Data

LED type


Luminous flux

neutral white 1400 Lumen per m

warm white 1350 Lumen per m

super warm white 1300 Lumen per m

Colour temperature

neutral white 4000 K

warm white 3000 K

super warm white 2700 K



Beam angle


Due to conditions of production photometric data can vary from production batch to production batch within the EU directive.

Product Types


Are you

a lighting designer, an electrical designer or an architect?

And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?

Just ask us