And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?Just ask us
Moon Sensor with Master - Slave function make it possible to control one or more lighting groups by means of RF signal. The most common applications are in tertiary buildings and residential blocks in, for example, corridors, stairwells and garages, both for new buildings and for relighting.
- Motion & daylight sensor incl.
- In case of power failure, battery lasts for > 3 h at 400 lm
The light turns on when you need it. A perfect combination of maximum light efficiency and minimum energy consumption.
Moon Master works based on an integrated microwave motion and light sensor mand RF transmitter. It can be set as ‘Broadcast’ or ‘Hopping’ which makes many applications possible. Moon Slave works based on a built-in RF receiver.
For hall or corridor
Here we follow the ‘Broadcast’ principle. This function is ideal for corridors with multiple entrances and exits. When a movement is detected by a Moon Master, all Moon luminaires of the same group with the same address will automatically jump on. By means of the DIP switches, the sensor of the Master is set and ready to work!
In this case, we follow the principle of ‘Hopping’.
In vertical staircases people walking upwards or downwards must be spotted so that the light is on at the right time. The ‘hopping’ setting of the Master offers a solution here. When movement is detected by a Master, all devices with an identical address will jump on to 100%. At the same time, the Master devices with an adjacent address will jump on to a preset light level (in the example, 10%).
range 6 to 8 m, ceiling height 3 m / 360° detection at an angle of 150° / 4 sensitivity levels: 25 - 50 - 75 - 100%
Daylight sensor: setting from 5 to 150 lux
Snooze: setting from 5 sec to 30 min.
RF Signal: range 50 m in open indoor spaces
Possibility: up to 32 zones