Flex Strip Xtend RGB

Flex Strip Xtend RGB

All the advantages of the Flex Strips extended up to 20 m long. The PROLED Flex Strip Xtend RGB is perfect when you have large rooms and long walls to illuminate with continuous light quality.

  • Excellent light quality and colour rendering, and – thanks to 48-volt technology – uniform dimmingover the entire length
  • Only one power feed needed for a length of 20 m. Significantly reduced installation effort
  • Installation with 3M adhesive tape on the strip’s backside (self adhesive).
  • Dimmable with suitable PWM dimmers

Technical Data

IP classification


Power source

48 VDC Common Anode (CA)

Electrical connection

2x cable to open wires; 4-pin; 30 cm

Maximum quantity per power input

20 m

Average lifetime*

50.000 h at L80/B10

Operating temperature range

-10° C till +45° C

Width x height

14 x 2 mm

min. Bending radius

20 mm


all 13 LEDs (16,7 cm)

*With correct installation and a suitable thermal management.

Photometric Data

LED type

SMD RGB 3-in-1 LEDs

Luminous flux

red 120 Lumen per m

green 300 Lumen per m

blue 70 Lumen per m

RGB 490 Lumen per m

Wave length

red 620 nm

green 525 nm

blue 470 nm

Beam angle


Due to conditions of production photometric data can vary from production batch to production batch within the EU directive.

Product Types

Are you

a lighting designer, an electrical designer or an architect?

And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?

Just ask us