Flex Strip Xtend RGBW

Flex Strip Xtend RGBW

All the advantages of the Flex Strips extended up to 20 m long. The PROLED Flex Strip Xtend RGBW is perfect when you have large rooms and long walls to illuminate with continuous light quality.

  • Excellent light quality and colour rendering, and – thanks to 48-volt technology – uniform dimmingover the entire length
  • Only one power feed needed for a length of 20 m. Significantly reduced installation effort
  • Installation with 3M adhesive tape on the strip’s backside (self adhesive).
  • Dimmable with suitable PWM dimmers

Technical Data

IP classification


Power source

48 VDC Common Anode (CA)

Electrical connection

2x cable to open wires; 5-pin; 30 cm

Maximum quantity per power input

20 m

Average lifetime*

50.000 h at L80/B10

Operating temperature range

-10° C till +45° C

Width x height

14 x 2 mm

min. Bending radius

20 mm


all 13 LEDs (16,7 cm)

*With correct installation and a suitable thermal management.

Photometric Data

LED type

SMD RGBW 4-in-1 LEDs

Luminous flux

red 130 Lumen per m

green 330 Lumen per m

blue 70 Lumen per m

white 310 Lumen per m

r+g+b+w 840 Lumen per m

Wave length

red 620 nm

green 525 nm

blue 470 nm

Colour temperature

neutral white 4000 K

super warm white 2700 K



Beam angle


Due to conditions of production photometric data can vary from production batch to production batch within the EU directive.

Product Types

Are you

a lighting designer, an electrical designer or an architect?

And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?

Just ask us