Flex Strip COB LP

Flex Strip COB LP

The PROLED FLEX STRIPS are perfect for indirect lighting, as custom made versions for fair or shop applications as well as for all kinds of illumination. Due to their shallow design and the individually adaptable lengths the PROLED FLEX STRIPS offer a wide spectrum of application possibilities.

  • Continuous luminous layer due to COB technology:Homogeneous illumination without visible LED points even with low profile depths
  • Increased stability due to spring steel strip on the back of the strip
  • High flexibility – adaptable to round shapes
  • Installation with 3M adhesive tape on the strip's backside (self adhesive).
  • dimmable and controllable via DMX 512, DALI, KNX, 1-10 V, CASAMBI, RF by MULTI power supplies/controller

Very suitable for flat profiles (e.g. PROFILE S-LINE LOW)
Plastic cover: without Cover | Clear | Frost | Milky (opal) | Black
Image title

Technical Data

IP classification

IP20

Power source

24 VDC

Electrical connection

2x cable with 2-PIN to open wires

Maximum quantity per power input

5 m

Average lifetime*

50.000 h at L80/B10

Operating temperature range

-10° C till +45° C

Width x height

8 x 2,4 mm

min. Bending radius

20 mm

Cuttable

all 5 cm (24 LED-Chips)

*With correct installation and a suitable thermal management.

Photometric Data

LED type

COB

Luminous flux

white 600 Lumen per m

neutral white 550 Lumen per m

warm white 500 Lumen per m

super warm white 500 Lumen per m

Colour temperature

white 6500 K

neutral white 4000 K

warm white 3000 K

super warm white 2700 K

CRI

90

Beam angle

120°

Due to conditions of production photometric data can vary from production batch to production batch within the EU directive.

Product Types

Accessories

Are you

a lighting designer, an electrical designer or an architect?

And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?

Just ask us