Flex Strip Spotless Free Cut

The PROLED FLEX STRIPS SPOTLESS FREE CUT are perfect for indirect lighting, as custom made versions for fair or shop applications as well as for all kinds of illumination. Due to their homogeneous illumination and matt appearance without visible LED dots, they are perfect for low profiles or for mounting without a cover. Cutting to the desired length is easy because of the free cutting technology.

High flexibility – adaptable to round shapes
Installation with 3M adhesive tape on the strip's backside (self adhesive).
dimmable and controllable via DMX 512, DALI, KNX, 1-10 V, CASAMBI, RF by MULTI power supplies/controller
IP65 for outdoor use

Very suitable for flat profiles (e.g. PROFILE S-LINE STANDARD)
Plastic cover: without Cover | Clear | Frost | Milky (opal) | Black
Image title

PROLED FLEX STRIP IP20+IP53+IP68 Manual (1.3 MB)

EULUMDAT/IES information

CUSTOMIZING FLEX STRIPS

5 years warranty information

Technical Data

IP classification	IP65 (for outdoor use)
Power source	24 VDC
Electrical connection	2x cable with 2-PIN to open wires
Maximum quantity per power input	5 m
Average lifetime*	50.000 h at L80/B10
Operating temperature range	-10° C till +45° C
Width x height	10 x 5 mm
min. Bending radius	20 mm
Cuttable	free cuttable (solder pads every 2 cm)

*With correct installation and a suitable thermal management.

Photometric Data

LED type	SMD LEDs
Luminous flux	neutral white 750 Lumen per m warm white 750 Lumen per m super warm white 650 Lumen per m
Colour temperature	neutral white 4000 K warm white 3000 K super warm white 2700 K
CRI	90
Beam angle	120°

Due to conditions of production photometric data can vary from production batch to production batch within the EU directive.

Product Types

Are you

a lighting designer, an electrical designer or an architect?

And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?

Just ask us